The DMF-CI-8 is a 2-space rack-mountable chassis designed to house up to eight Crestron® DM-NVX-C or DMCF series cards. Any of these cards may be installed in any slot.
Eight-slot card frame for Crestron® DM-NVX-C and DMCF series cards
Provides a high-density, multi-endpoint 4K video solution
Hot-swappable card serviceability
Front panel 2 inch color LCD display and status indicators
Network setup for each card through front panel
Variable-speed fan cooling
2-space 19-inch rack-mountable
Input/Output Board/Card Type - Network
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
350 Watt
Current Draw:
4.30 Amps
Depth:
15.43 in
Height:
3.47 in
Width:
17.40 in
Product Weight:
9.90 lbs
Regulatory Compliance:
HDCP
COMMUNICATIONS:
•USB Host: For loading of firmware via a USB mass storage device •USB Device: Computer console for setup •RS-232: Computer console for setup
Card Slots:
•CARD SLOT ID 1 - 8: (8) Card slots •Each slot accepts (1) DM-NVX-C series encoder/decoder card or (1) DMCF series transmitter or receiver card
Connectors:
•G: (1) 6-32 screw •Chassis ground lug •100-240V~4.3-1.8A 50/60Hz: (1) IEC 60320 C14 main power inlet •Mates with removable power cord, included •CONSOLE, SERIAL (front): (1) 8-pin RJ45 female •RS-232 computer console port •CONSOLE, USB (front): (1) USB Type-B female •USB computer console port •USB (front): (1) USB Type A female •Supports USB mass storage devices for firmware update
Controls and Indicators:
•PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line, turns amber while booting and green when operating •STATUS: (1) Bi-color green/red LED, indicates a normal (green) or critical error (red) condition •Display: (1) 2 inch (52 mm) diagonal, 220 x 176 pixels, 16-bit TFT active matrix color LCD, displays IP address settings for each installed card •Nav Pad: (1) 5-way navigation pad for menu navigation and adjustment of settings •HOME: (1) Pushbutton, enters or returns to the home menu •BACK: (1) Pushbutton, steps menu back one level •CARD SLOT STATUS, TX 1 - 8: (8) Green LEDs, each indicates the corresponding card is in transmitter mode •CARD SLOT STATUS, RX 1 - 8: (8) Green LEDs, each indicates the corresponding card is in receiver mode •CARD SLOT STATUS, OL 1 - 8: (8) Green LEDs, each indicates the corresponding card is online