System consists of a camera side unit and a frame grabber side unit (both units are similar in appearance, but are labeled differently). Each extender supports the camera signals, as well as serial connections (both the SerTFG and SerTC within the MDR cable, and three pairs of RS-232 lines). The CFL-5000 supports one or two base Camera-Linkâ„¢ cameras or one dual-base Camera-Linkâ„¢ camera configurations. Each configuration requires three fibers. The CFL-5000 receives data from each camera and converts the data into optical signals and sends them to the CFL-5000 transmitter. The transmitter in turn converts the optical signals into video data and sends them out to the one dual-base frame grabber (PC). The CFL-5000 is available with SC, ST, or LC-type fiber connectors for multi-mode fiber extension and SC/APC for single-mode fiber extension.
Supports all Camera-Linkâ„¢ dual-base configurations with pixel clocks from 20 to 85MHz
Extend camera signals up to: 350 meters using standard multi-mode fiber, 1000 meters using eSX+ fiber, 10 kilometers using single-mode fiber
Transparent Camera-Linkâ„¢ operation
Small form factor, units are self-contained and do not require user adjustments
Signal transmission via fiber optic cable no RF interference
Serial Port (RJ45) with RS232 interface
Class 1 laser product
Industrial options also include: power input: 5 to 12V or 12 to 24V, screw lock (threaded) power connector, use of users own DC input, din rail connectors for mounting, chassis ground post
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
DC Voltage:
5 Volts
Depth:
5.44 in
Height:
1.19 in
Width:
9 in
Product Weight:
1 lbs
Shipping Weight:
6 lbs
Warranty (Length/Type):
12 months
Pixel Clock:
20 to 85 MHz
Humidity:
5 to 95 % (RH, non-condensing)
Power Consumption:
<10 W (per unit)
DC Adapter:
AC/DC adapter universal
Camera Side Video:
MDR-26 (2)
Camera Side Serial:
RJ45
Camera Side Power:
2.5mm connector
Camera Side Fiber Connectors:
SC, ST, or LC (3)
Frame Grabber Side Video:
MDR-26 (2)
Frame Grabber Side Serial:
RJ45
Frame Grabber Side Power:
2.5mm connector
Frame Grabber Side Fiber Connectors:
SC, ST, or LC (3)
Cables Included:
MDR-26 Camera-Linkâ„¢ Cable, 2 meters (4), KIT-000013-R which contains: DB9 Male to RJ45 Female Adaptor (1), DB9 Female to RJ45 Female Adaptor (1), CAT 5 Cable, 3 meters (2)
Operating Distance (Multimode):
1148.29 ft
Operating Distance (Singlemode):
32808.40 ft
Camera Fiber-Link 3000
- Camera Fiber Link 3000 Extender with Camera Side TX and Frame Grabber Side RX