The SEQUOIA 5103 series is a modular 2×1 protection changeover unit. It is designed for SEQUOIA Series Intelligent Signal Processing System. The 5103 series provides a main input, a backup input and an auxiliary input for each channel. It sends the input video and audio signals to the detector and the switch individually. Changeover mode can be selected Auto or Manual. The 5103 series detects the input health status in real time and identifies signals based on the predetermined conditions in case of loss. It will route the corresponding valid inputs for output in priority of Main, Backup and Auxiliary Inputs under automation; while sending an alarm to the control panel to alert the operator for switching in manual mode. The 5103 series transmits the signal status and changeover result to the control panel in real time. LED indicator on module edge shows the status of signals, and the adjustment switch can adjust the parameters manually. Module with independent rear panel is used in SEQUOIA 1RU or 2RU frame. The 5103 series supports the function of network monitoring of SEQUOIA series platform. The module can be controlled and monitored via SEQUOIA network control module and SQ-MASTER platform control software.
Seamless switching between Primary and Backup HD/SD-SDI
Detects HD/SD-SDI and embedded audio
Audio loss judgement time optional: 20 sec, 30 sec, 40 sec, 50 sec, 60 sec
Main and backup signal supports BY-PASS
Automatic/manual mode
Alarm via RS-232/422, alarm conditions can be pre-configured
GPI trigger
Built-in line automatic correction, line output delay adjustable
Remote control via control panel
Non-volatile memory
Hot-swappable
Computer control supported
Seamless Switcher Video Input Type - HD/HDMI
Seamless Switcher Video Input Type - Other
Rackmountable - Yes
Spec Sheet available - Yes
Number of Inputs:
2
Number of Outputs:
1
Rackmountable:
Yes
Rack Units (Height):
2
SQ-MASTER
- SEQUOIA Series Platform Control Software