Pro AV Catalog
ESE - ES-302UE
ese
Request
Quote
All Products
from this brand

Desktop 100 Minute Up/Down Timer / Thumbwheel Preset

Model: ES-302UE

  • .56" Yellow LED Display
  • 100 Minute Up/Down count range (00:00 - 99:59)
  • Thumbwheel Preset
  • Optional relay-contact closure output at zero
  • Optional Stop at zero
Compare
Project List
Product Info
Tech Specs
Documents

The ES-302UE is a 100 Minute Up/Down Timer. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. If the relay contact closure option is ordered, the contacts are accessible on a rear-mounted DB-9 connector.

  • .56" Yellow LED Display
  • 100 Minute Up/Down count range (00:00 - 99:59)
  • Thumbwheel Preset
  • Optional relay-contact closure output at zero
  • Optional Stop at zero
  • Optional Tenths of Seconds display
  • Optional 1.75" Rackmount enclosure (option "P")
  • 220-240 VAC (110-120 VAC is standard) & UL options available
  • Product Options:
  • Clear---Clear Anodized Front Panel
  • C---Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
  • D---Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
  • J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
  • N---Reverse Count at Zero: Changes count direction from Down to Up at Zero.
  • P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
  • P2---Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
  • Q---Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
  • R---Remote Input: Rear-mounted connector for Remote Control.
  • S---Parallel BCD Slave: Parallel BCD Slave for use with old style BCD Outputs.
  • T---Tenths of Seconds: Tenths of Seconds LED Display added.
  • UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
  • W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.
  • Y---Relay Closure at Zero: Reed Relay for Control Applications (10W max load; 500ma switching current).
  • Z---Stop with reed relay closure at Zero (10W max load; 500ma switching current).
 
Request Quote