SUBSCRIBE TO NEWSLETTER
Pro AV Catalog
Crestron Electronics, Inc. - HDI-TX-301-C-2G-E-B-T
Crestron Electronics, Inc. - HDI-TX-301-C-2G-E-B-T Crestron Electronics, Inc. - HDI-TX-301-C-2G-E-B-T Crestron Electronics, Inc. - HDI-TX-301-C-2G-E-B-T Crestron Electronics, Inc. - HDI-TX-301-C-2G-E-B-T
Request Quote
All Products
crestron-electronics

DM Lite HDMI over CATx Transmitter and 3 x 1 Auto-switcher with 2 HDMI+ VGA and Analog Audio, UK/European Wall Plate, Black Textured

Series: HDI-TX-301-C-2G-E

Model: HDI-TX-301-C-2G-E-B-T

Part #: 6508603

  • Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
  • Enables extension of HDMI® video and audio signals
  • Also converts and extends VGA and analog audio signals
  • Auto-switches between two HDMI inputs and one VGA input
  • Links to the receiver via a single CAT5e (or better) twisted pair cable
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Pairs with a DM Lite receiver to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K. Provides auto-switching HDMI (x2), VGA, and stereo analog audio inputs. Mounts in a 2-gang UK or European electrical box.

Overview:

The HDI-TX-301-C-2G-E (-B-T or -W-T) is a UK/European wall plate DM Lite transmitter designed to pair with a DM Lite receiver to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 70m (230ft) is supported for HD 1080p, WUXGA, and 2K signals, or up to 40m (130ft) for UHD and 4K.

The HDI-TX-301-C-2G-E includes two HDMI inputs plus one VGA input. The VGA input is accompanied by a stereo analog audio input. Auto-switching between the HDMI and VGA inputs affords plug-and-play simplicity. Manual input selection is also available using the front panel "INPUT SEL" button. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. It cannot be paired with the HDMI video input however.

Note: When paired with an HD-RX-201-C-E receiver, the local inputs are switched in combination with the HDMI input on the receiver, and can also be controlled remotely through integration with a Crestron® control system.

A CAT6a RJ45 courtesy jack is included to provide a 1000Base-T network connection for computers and other devices. The front panel jack simply passes through to a parallel jack on the rear, which connects to an available port on the customer' LAN. This LAN jack is provided as a convenience to supplant the need for a separate RJ45 wall jack. It does not interface with the DM Lite system and cannot be used to extend Ethernet signals or interface with a control system.

The HDI-TX-301-C-2G-E series comes in black or white, and is designed to mount in a 2-gang UK or European electrical box (not included). It is normally powered by the receiver over the link cable when using a surface mount receiver.

  • Pairs with a DM Lite receiver to provide a simple point-to-point signal extender and switcher
  • Enables extension of HDMI® video and audio signals
  • Also converts and extends VGA and analog audio signals
  • Auto-switches between two HDMI inputs and one VGA input
  • Links to the receiver via a single CAT5e (or better) twisted pair cable
  • Supports 4K and UHD at up to 130ft (40m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230ft (70m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X® and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI, DVI, and Dual-Mode DisplayPort sources
  • Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA
  • HDCP 1.4 compliant
  • Passes CEC and EDID signals
  • Allows control system integration when paired with an HD-RX-201-C-E receiver
  • Courtesy LAN jack
  • Flush wall mount design
  • Installs in a 2-gang UK or European electrical box (45mm deep)
  • FP-INTENSE and FP-PURE faceplates sold separately
  • Normally powered by the receiver (surface mount) over the link cable
  • Universal 100-240V power pack available separately (coming soon) for use with a wall plate receiver
 
Request Quote