The SQ-DVF-2102 is a modular digital video frame synchronizer which is designed for use in Sequoia Series Signal Processing Platform. It synchronizes the input SDI digital component video signals compliant with SMPTE 259M-C (270Mb/s) with the external reference sync signals. The SQ-DVF-2102 provides two SDI outputs and two CVBS monitoring outputs. It supports continuous adjustment of H-phase and V-phase with auto-alignment. Input cable equalization is up to 1000ft (about 300m). LED indicator on module edge shows the status information of signals, and the ADJ switch can adjust the parameters manually. Module with independent rear panel can be used in Sequoia 1RU or 2RU frame. The SQ-DVF-2102 supports the function of network monitoring of Sequoia series platform. The module can be controlled and monitored via Sequoia network control module and SQ-MASTER platform control software.
Supports input signals compliant with SMPTE 259M-C and 525/625 component
10bits quantization processing
Supports reference video input and high-impedance loop-thru
Output with frame sync; H-phase and V-phase adjustable
Auto-alignment for H-phase and V-phase
Two CVBS monitoring outputs
Input cable equalization up to 1000ft (about 300m)
Non-volatile memory
Hot-swappable
Supports centralized control via PC
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Output Impedance:
75 ohm
Quantization:
10 bit
Active Power:
5 Watt
Rack Units (Height):
1 or 2
Input Signal Format:
SMPTE 259M-C, CVBS
Output Signal Format:
SMPTE 259M-C, CVBS
SQ-MASTER
- SEQUOIA Series Platform Control Software
