The SQ-DMX-2132 is a SDI and stereo audio demultiplexer with frame sync. It is designed for Sequoia Signal Processing Platform. he SQ-DMX-2132 extracts embedded audio from the SDI inputs (SMPTE 259M-C, 270Mb/s, 525/625 component) and outputs dual-channel analog audio with individual level control. It provides two CVBS monitoring outputs with optional audio meter and two SDI outputs. Input cable equalizing is up to 1000ft (about 300m). The SQ-DMX-2132 supports genlock of outputs with the reference video. Continuous adjustment of H-phase, V-phase and sub-carrier phase is available. LED indicator on module edge shows the status information of signals, and the ADJ switch can adjust the parameters manually. Module with independent rear panel can be used in Sequoia 1RU or 2RU frame. The SQ-DMX-2132 supports the function of network monitoring of Sequoia series platform. The module can be controlled and monitored via Sequoia network control module and SQ-MASTER platform control software.
Supports SMPTE 259M-C, 525/625 component inputs
Supports SMPTE 272M
16 optional channels for audio extraction
Dual-channel audio outputs with individual level control
Supports reference video input
Output with frame sync; H-phase, V-phase and sub-carrier phase adjustable
One by-pass protected SDI output
Two CVBS monitoring outputs with optional audio meter
8bits or 10bits quantified output
Auto cable equalization up to 1000ft (about 300m)
Non-volatile memory
Hot-swappable
Supports centralized control via PC
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Number of Audio Channels:
16
Number of Inputs:
2
Number of Outputs:
4
Output Impedance:
75 ohm
Active Power:
7 Watt
Quantization:
8 or 10 bit
Rack Units (Height):
1 or 2
SQ-MASTER
- SEQUOIA Series Platform Control Software