High-density variant of the DTM-3200 for converting 4 transport streams from ASI to IP
IP output can be multicast over a network to potentially many receivers. IPv6 and source-specific multicast (SSM) are supported
Applications:
Use the DTM-3224 as an "I/O extender" for adding ASI inputs to transport-stream processing equipment (e.g. multiplexers) that receive all streams over a network port
The DTM-3224 is a highly-integrated and cost-effective OEM module for converting four ASI transport streams to IP. The next-generation architecture of this device has support for IPv6 and for IGMP v3, enabling source-specific multicast.
High-density variant of the DTM-3200 for converting 4 transport streams from ASI to IP
IP output can be multicast over a network to potentially many receivers. IPv6 and source-specific multicast (SSM) are supported
Applications:
Use the DTM-3224 as an "I/O extender" for adding ASI inputs to transport-stream processing equipment (e.g. multiplexers) that receive all streams over a network port
Multi-channel ASI to IP gateways
Feed ASI signals to a PC application via the PC's standard network port
Spec Sheet available - Yes
AC Voltage:
12 Volts
Depth:
0.55 in
Height:
2.17 in
Width:
3.15 in
Ethernet encapsulation:
IEEE 802.2 SNAP, Eth. II
IP support:
IPv4, IPv6
IP-address assignment:
DHCP, DHCPv6, link local or static
Multicast support:
IGMP v3, MLDv2
Device Management:
Out of band: RS-232, USB 2.0, I2C
NETWORK MANAGEMENT:
Not supported
GigE:
• port Physical layer IEEE 802.3a •Data rate 100/1000 •Connector RJ-45 with LEDs
ASI ports:
•Number of ports 4 •Physical layer EN50083-9 •Connector 4x 75-ohm MCX •Tx bitrate per port 0.1 to 214Mbit/s •Total Tx rate (max) 750Mbit/s
Transport:
•TPs per IP 1 to 7 •Encapsulation SMPTE 2022-2 •UDP or RTP •FEC SMPTE 2022-1
DTE-3120
- Network ASI Input Power over Ethernet Adapter
DTM-3200
- OEM TS-over-IP Converter with Standard Pin Headers
