The VMF-2 is a 2 channel mixer/fader. It will fade from A to B, B to A or A to Black. There is an auto mode that allows the transition to be preset from 0.2 seconds (approx. 6 Frames) to 6 seconds. The transition occurs upon hitting the TAKE button or a GPI trigger. In the A to B mode, the sources must be genlocked. In the A to Black mode, no B input is required. The output is dc clamped to zero Volts. The VMF-2 is 12 Vdc powered, wall module included.
2 channel mixer/fader
Fade from A to B, B to A or A to Black
Allows the transition from 0.2 seconds (approx. 6 Frames) to 6 seconds
Transition occurs upon hitting the TAKE button or a GPI trigger
Output is dc clamped to zero
12 Vdc powered, wall module included
Warranty - Yes
AC Voltage:
120 Volts
Current Draw:
0.50 Amps
DC Voltage:
12 Volts
Warranty (Length/Type):
2 years
Depth:
5.50 in
Height:
1.50 in
Width:
4.10 in
Input/Output:
1 Volt standard video
Input Impedance:
HiZ or 75 Ohms 1%, looping (jumper/switch selected)
Output Impedance:
75 ohms 1%
Video Connector:
BNC, 4 pin MiniDIN for Y/C input
GPI Trigger:
Contact closure initiates action
Output Protection:
Open or Short, infinite duration
Black Output:
Sync, Color Burst and 7.5 IRE setup (0 IRE PAL)
